RBC Inlet Manifold Kit Honda

£409.00

Heres a complete RBC Kit

Description

Heres a great value kit for you.  When you get our kit we’ll send you everything you need to install your RBC.  You’ll Get

  • RBC inlet manifold – The famous RBC manifold is a genuine Honda part. This is one of the best inlet manifolds available for the K20A engine and it out performs most other manifolds through the whole rev range. With Hondata K-pro this manifold can give +15BHP.
  • Thermal Inlet Manifold Gasket – This gasket helps reduce intake air temps by removing the direct connection of the intake manifold to the cylinder head. By placing this thermal shield between the intake manifold and the cylinder head, you will help reduce the amount of heat soak the intake manifold normally absorbs from the cylinder head resulting in an increase in power. Made from PTFE – the ultimate thermo-plastic and manufactured in the UK using the latest water-cutting technology.
  • Thermal Throttle Body Gasket – This gasket helps reduce intake air temps by removing the direct connection of the intake manifold to the throttle body. By placing this thermal shield between the intake manifold and the throttle body, you will help reduce the amount of heat soak the throttle body normally absorbs from the inlet manifold resulting in an increase in power. Made from PTFE – the ultimate thermo-plastic and manufactured in the UK using the latest water-cutting technology.
  • Throttle Body Adaptor Plate – Fitting an RBC intake manifold to your K-Series engine is one of the most cost effective, performance enhancing parts you can purchase. In order to fit one however, you’ll need one of these, because the manifolds were designed by Honda to run K24 throttle bodies. This CNC machined plate allows you to utilise your original K20A/K20A2 throttle body, meaning your car will soon be breathing harder and more efficiently.
  • Throttle Body Gasket (for the other side of the plate) and Extended Vac Pipe – The gasket sits ‘manifold side’ of the adaptor, and the pipe is used to replace the shorter one found on the original inlet manifold. As with all genuine Honda parts expect perfect fit and performance every time.
  • Blanking Screw – for the little hole everyone else forgets about in the top of the RBC

And you get it all at a great package price!