Autronic

We highly recommend Autronic products. We find them some of the most flexible and user friendly systems on the market.

Autronic SMC

Autronic SMC is sequential 3D ECU available in three case styles, standard, sealed and water proof.

This is the biggest selling model and is suitable for most applications.

The Autronic SMC includes harness, air and water temp sensor, internal map sensor, fuel pump relay, PC data cable, calibration and data logging software, 100 page manual.

The internal map sensor is available in 1bar absolute or 4.4 bar absolute (50 psi).

Available with high current (low impedance) or low current (high impedance) injector drivers.

Harness is a flying lead type and has a connector which plugs into the Ecu, and has a socket for fuel pump relay, and socket for data cable connection to a IBM compatible PC or Laptop serial port. The other end of the harness has to be connected as per the wiring diagram .

The software is compatible with USB ports, when used with USB to serial adapter.

Autronic SM2

Autronic SM2 is sequential 3D ECU. This model is aimed at the serious racer. With traction control, it is ideal for circuit racing.

The Autronic SM2 includes harness, air and water temp sensor, internal map sensor, fuel pump relay, PC data cable, calibration and data logging software, 100 page manual.

The internal map sensor is available in 1bar absolute or 4.4 bar absolute (50 psi).

Available with high current (low impedance) or low current (high impedance) injector drivers.

Harness is flying lead type and has a connector which plugs into the Ecu, and socket for fuel pump relay.

The data cable to connects between PC or Laptop serial port and socket on the ECU case.
Software is compatible with USB ports, when used with USB to serial adapter.

Autronic SM4 Plug and Play Boards for Evo, Scooby and Civic Type R

Autronic has produced replacement ECU boards for the original ECU on Mitsubishi EVO 4,5,6,7 and 8. Subaru WRX 1995-96, 1997-98 and 1999-00. Honda Civc/Integra 1992-95 (OBD1) and also 1996-00 OBD2 cars when used with the supplied adapter harness.

The original motherboard and connector are removed from the ECU case, and the Autronic motherboard and connector, clips or screws into the case. The original harness plugs in and the job is done, no wiring and all original sensors are used.

Considerable gains in power across the complete RPM range can be achieved with these boards.

Both road car and Group N rally car versions available. External view of ECU case and connector is unchanged from its stock appearance.

Allows full control over fuel, ignition timing, boost pressure and all other engine functions. All boards have Anti-lag and Autotune.

Eurospec can supply fit and map any Autronic product.