Hondata

Hondata is one of the most cost effective and complete engine management systems available for Honda vehicles.  Eurospec offer many Hondata products from stock as well as ECU modification and socketing as a same day service.

K100

Designed for the Honda K series engines, the K100 is a daughterboard which is installed in your own ecu. This board can then be custom programed by our experianced mappers to maximise the performance of your vehicle.

K-Pro

The K Pro is a fully programable ECU for any of the vehicles using the K series engine.

Main features:

  • Fits inside the ECU
  • Made in USA
  • USB connection for speed and compatibility
  • KManager Windows based software for parameter & table editing, calibration uploading and datalogging.
  • Many built in calibrations for common engine combinations
  • Built in datalogging to a laptop
  • On board datalogging memory (2 MB memory, 10-110 minutes datalogging)
  • Adjustment for different sized injectors, with overall fuel trim.
  • Configurable for any MAP sensor (to 5 Bar and above)
  • TPS based table lookup for ITBs
  • Engine protection from over boost and lean protection.
  • Expanded fuel and ignition tables, both in rpm and load, to 60 lbs boost and 11,000 rpm (these are not the upper limits)
  • Launch control with anti-lag
  • Three multi purpose outputs for nitrous control or similar
  • Supports lambda tracing from the stock wideband o2
  • PWM output for boost control

KManager editing software features:

  • High and low speed 16 x 20 ignition and fuel tables for correct VTEC tuning
  • Injector size fuel trim
  • Fuel trim for starting, throttle tip in and individual cylinder trim
  • Rev limiter with fuel cut
  • Launch control with anti-lag
  • Adjustable VTEC window with load and throttle control
  • Adjustable idle speed
  • MAP sensor type and calibration
  • Adjustable boost cut with hot and cold settings
  • Closed loop control
  • Air temperature compensation
  • Fuel and ignition correction based on gear
  • Closed loop
  • Three general purpose outputs for nitrous control, quad boost control or similar
  • On board datalogging trigger conditions

Using Hondata products, Eurospec is able to remap both turbo and NA Hondas. Typically large gains are available even in NA applications.

See what Hondata is avialable for your car